Filter
Top Products
1438 CHAPTER 91: IPV6 MULTICAST ROUTING AND FORWARDING CONFIGURATION COMMANDS
Related command: display multicast ipv6 forwarding-table.
Example # Set the maximum number of downstream nodes for a single route in the IPv6
multicast forwarding table to 120.
<Sysname> system-view
[Sysname] multicast ipv6 forwarding-table downstream-limit 120
multicast ipv6 forwarding-table route-limit
Syntax multicast ipv6 forwarding-table route-limit limit
undo multicast ipv6 forwarding-table route-limit
View System view
Parameter limit: Maximum number of routing entries in the IPv6 multicast forwarding table.
The value ranges 0 to 900.
Description Use the
multicast ipv6 forwarding-table route-limit command to configure
the maximum number of routing entries in the IPv6 multicast forwarding table.
Use the
undo multicast ipv6 forwarding-table route-limit command to
restore the maximum number of routing entries in the IPv6 multicast forwarding
table to the system default.
By default, the maximum number of routing entries in the IPv6 multicast
forwarding table is 900.
The allowable maximum number of routing entries varies with devices.
Related command: display multicast ipv6 forwarding-table.
Example # Set the maximum number of routing entries in the IPv6 multicast forwarding
table to 200.
<Sysname> system-view
[Sysname] multicast ipv6 forwarding-table route-limit 200
multicast ipv6 load-splitting
Syntax multicast ipv6 load-splitting {source | source-group }
undo multicast ipv6 load-splitting
View System view
Parameter source: Specifies to implement IPv6 multicast load splitting on a per-source basis.