Filter
Top Products
1584 CHAPTER 96: MPLS TE CONFIGURATION COMMANDS
Tunnel Dest: 29.29.29.29 Ingress LSR ID: 19.19.19.19
LSP ID: 1 Session Tunnel ID: 0
Session Name: Tunnel1
Previous Hop Address: 19.19.19.19
Token bucket rate: 0.0 Token bucket size: 0.00
display mpls rsvp-te statistics
Syntax display mpls rsvp-te statistics { global | interface [ interface-type
interface-number ]}
View Any view
Parameter global: Display global RSVP-TE information.
interface: Displays statistics about RSVP-TE for a specified or all interfaces if no
interface is specified.
interface-type interface-number: Specifies an interface for which statistics about
RSVP-TE is displayed.
Description Use the
display mpls rsvp-te statistics command to display statistics about
RSVP-TE.
Example # Display global RSVP-TE statistics.
<Sysname> display mpls rsvp-te statistics global
LSR ID: 1.1.1.1
PSB Count: 1 RSB Count: 1
RFSB Count: 0 TCSB Count: 1
LSP Count: 1
Total Statistics Information:
PSB CleanupTimeOutCounter: 0 RSB CleanupTimeOutCounter: 0
SendPacketCounter: 55 RecPacketCounter: 54
SendPathCounter: 5 RecPathCounter: 0
SendResvCounter: 0 RecResvCounter: 4
SendResvConfCounter: 0 RecResvConfCounter: 0
SendHelloCounter: 2 RecHelloCounter: 48
Table 402 Description on fields of the display mpls rsvp-te sender command
Field Description
Interface Ethernet1/0 RSVP-TE enabled Ethernet interface
Tunnel Dest Tunnel destination, in the format of X.X.X.X
Ingress LSR ID Ingress LSR ID, in the format of X.X.X.X
LSP ID LSP ID
Tunnel ID Tunnel ID
Session Name: Session name
Previous Hop Address Previous hop address, in the format of X.X.X.X
Token Bucket rate Token bucket rate, a traffic parameter
Token Bucket Size Token bucket size, a traffic parameter