Filter
Top Products
2475
quit Exit from current command view
super Privilege current user a specified priority level
telnet Establish one TELNET connection
tracert Trace route function
undo Undo a command or set to its default status
<Sysname>
# Enable user 1 to access level 3 commands.
<Sysname> system-view
[Sysname] local-user user1
New local user added.
[Sysname-luser-user1] level 3
user-interface
Syntax user-interface { first-num1 [ last-num1 ] | { aux | console | tty | vty } first-num2
[ last-num2 ]}
View System view
Parameter first-num1: Absolute number of the first user interface. The value range varies
with devices, and normally starts from 0.
last-num1: Absolute number of the last user interface. The value range varies with
devices, and normally starts from 0, but cannot be smaller than the first-num1.
first-num2: Relative number of the first user interface, in the following rules:
■ For the AUX port, the value is 0.
■ For the Console port, the value is 0.
■ For TTY user interfaces, the value range varies with devices, and normally starts
from 1.
■ For VTY user interfaces, the value ranges from 0 to 4.
last-num2: Relative number of the last user interface, in the following rules:
■ For TTY user interfaces, the value range varies with devices, and normally starts
from (first-num2+1).
■ For VTY user interfaces, the value ranges from (first-num2+1) to 4.
Description Use the
user-interface command to enter a single or multiple user interface
view(s).
Example # Enter Console user interface view.
<Sysname> system-view
[Sysname] user-interface console 0
[Sysname-ui-console0]
# Enter the user interface view of VTY 0 to 3.