Filter
Top Products
294 CHAPTER 19: ATM CONFIGURATION COMMANDS
display atm interface
Syntax display atm interface [ atm interface-number ]
View Any view
Parameter interface-number: Specifies an ATM interface to view the detailed information
about.
Description Use the
display atm interface command to display detailed information about
ATM interface.
Note that:
If you provide the interface-number argument, this command displays the
information about the ATM interface identified by the argument.
If you do not provide the argument, this command displays the information about
all the ATM interfaces.
Example # Display the information about ATM 4/0 interface.
<Sysname> display atm interface atm 4/0
ATM interface Atm4/0, State UP
Port Information:
Maximum VCs: 1024
PVCs: 5, MAPs: 1
input pkts: 11603, input bytes: 426476, input pkt errors: 37092
output pkts: 14053, output bytes: 519106, output pkt errors: 0
Main interface Information:
PVCs: 4, MAPs: 1
input pkts: 11603, input bytes: 426476, input pkt errors: 19210
output pkts: 14053, output bytes: 519106, output pkt errors: 0
ATM interface Atm4/0.1, point-to-point, State UP
Sub-interface Information:
PVCs: 1, MAPs: 0
input pkts: 0, input bytes: 0, input pkt errors: 17880
output pkts: 0, output bytes: 0, output pkt errors: 0
Service ubr 8000 The PVC’s service type and the bit rate
encapsulation aal5snap The type of ATM AAL5 encapsulation of the PVC is
aal5snap.
Table 23 Description on the fields of the display atm class command
Field Description
Table 24 Description on the fields of the display atm interface command
Field Description
ATM interface Atm6/0/0, State UP Name and state of the interface
Maximum VCs Maximum number of VCs on the ATM
interface