Filter
Top Products
1519
regular-expression: Regular expression, a string of 1 to 80 characters. No blank
space is acceptable.
Description Use the display mpls ldp cr-lsp command to display information about CR-LSPs
established by LDP.
Related command: display mpls lsp.
Example # Display information about CR-LSPs established by LDP.
<Sysname> display mpls ldp cr-lsp
Displaying All LDP CR-LSP(s) for public network
----------------------------------------------------------------
CR-LSP ID DestAddress/Mask In/OutLabel In/Out-Interface
----------------------------------------------------------------
1.1.1.9:0 2.2.2.9/32 NULL/1027 -------/S2/0
2.2.2.9:0 1.1.1.9/32 1027/NULL S2/0/-------
----------------------------------------------------------------
The Total LDP CR-LSP(s): 2
display mpls ldp interface
Syntax display mpls ldp interface [ all ] [ [ vpn-instance vpn-instance-name ]
[ interface-type interface-number ]] [verbose ] [ | { begin | exclude | include }
regular-expression ]
display mpls ldp interface [ all ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
View Any view
Parameter all: Displays all information.
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31
characters.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed information.
|: Filters the output information.
begin: Begins with the specified string.
Table 371 Description on the fields of the display mpls ldp cr-lsp command
Field Description
CR-LSP ID ID of the CR-LSP
DestAddress/Mask Destination address and the mask of the FEC
In/OutLabel Incoming label/outgoing label
In/Out-Interface Incoming interface/outgoing interface