Filter
Top Products
1163
Parameters process-id: RIP process number, in the range of 1 to 65535.
vpn-instance vpn-instance-name: Specifies a VPN instance name, a string of 1 to
31 characters.
Description Use the display rip command to display the current status and configuration
information of the specified RIP process.
■ If process-id is not specified, information about all configured RIP processes is
displayed.
■ If vpn-instance-name is specified, the RIP configuration of the specified VPN
instance is displayed.
Examples # Display the current status and configuration information of all configured RIP
processes.
<Sysname> display rip
Public VPN-instance name :
RIP process : 1
RIP version : 1
Preference : 100
Checkzero : Enabled
Default-cost : 0
Summary : Enabled
Hostroutes : Enabled
Maximum number of balanced paths : 8
Update time : 30 sec(s) Timeout time : 180 sec(s)
Suppress time : 120 sec(s) Garbage-collect time : 120 sec(s)
TRIP retransmit time : 5 sec(s)
TRIP response packets retransmit count : 36
Silent interfaces : None
Default routes : Disabled
Verify-source : Enabled
Networks :
192.168.1.0
Configured peers : None
Triggered updates sent : 0
Number of routes changes : 0
Number of replies to queries : 0
Table 278 Description on the fields of the display rip command
Field Description
Public VPN-instance name (or
Private VPN-instance name)
The RIP process runs under a public VPN instance/The RIP
process runs under a private VPN instance
RIP process RIP process number
RIP version RIP version 1 or 2
Preference RIP route priority
Checkzero Indicates whether the zero field check is enabled for RIP-1
messages.
Default-cost Default cost of the redistributed routes
Summary Indicates whether the routing summarization is enabled
Hostroutes Indicates whether to receive host routes
Maximum number of balanced
paths
Maximum number of load balanced routes
Update time RIP update interval