Filter
Top Products
1997
firewall packet-filter ipv6
Syntax firewall packet-filter ipv6 { acl6-number | name acl6-name } { inbound |
outbound }
undo firewall packet-filter ipv6 { inbound | outbound }
View Interface view
Parameter acl-number: Basic ACL number, in the range 2000 to 2999; advanced ACL
number, in the range 3000 to 3999.
name acl6-name: Specifies the name of a basic or advanced IPv6 ACL, a
case-insensitive string of 1 to 32 characters that must start with an English letter a
to z or A to Z. To avoid confusion, the word “all” cannot be used as the ACL
name.
inbound: Filters packets in the inbound direction.
outbound: Filters packets in the outbound direction.
Description Use the
firewall packet-filter ipv6 command to configure IPv6 packet filtering
on the interface.
Use the
undo firewall packet-filter ipv6 command to remove the IPv6 packet
filtering setting on the interface.
By default, IPv6 packets are not filtered on the interface.
Example # Configure IPv6 packet filtering for Ethernet 1/0 using IPv6 ACL 2500.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] firewall packet-filter ipv6 2500 outbound
reset firewall ethernet-frame-filter
Syntax reset firewall ethernet-frame-filter { all | dlsw | interface interface-type interface
number }
View User view
Parameter all: Removes all firewall statistics.
dlsw: Removes the firewall statistics of the DLSw module.
interface-type interface-number: Specifies an interface by its type and number.
Description Use the
reset firewall ethernet-frame-filter command to clear the Ethernet
frame filtering statistics.