Filter
Top Products
1977
display stop-accounting-buffer
Syntax display stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name
View Any view
Parameter hwtacacs-scheme hwtacacs-scheme-name: Specifies a HWTACACS scheme by
its name, a string of 1 to 32 characters.
Description Use the
display stop-accounting-buffer command to display information
about the stop-accounting requests buffered in the device by scheme, session ID,
time range, user name, or slot.
Related command: reset stop-accounting-buffer, stop-accounting-buffer enable (HWTACACS
scheme view), retry stop-accounting (HWTACACS scheme view).
Example # Display information about the buffered stop-accounting requests for
HWTACACS scheme hwt1.
<Sysname> display stop-accounting-buffer hwtacacs-scheme hwt1
Total 0 record(s) Matched
hwtacacs nas-ip
Syntax hwtacacs nas-ip ip-address
undo hwtacacs nas-ip
View System view
Parameter ip-address: IP address in dotted decimal notation. It must be an address of the
device and cannot be all 0s address, all 1s address, a class D address, a class E
address or a loopback address.
Description Use the
hwtacacs nas-ip command to set the IP address for the device to use as
the source address of the HWTACACS packets to be sent to the server.
Response-timeout-interval Server response timeout period
Acct-stop-PKT retransmit times Number of stop-accounting packet
transmission retries
Domain-included Whether a user name includes the
domain name
Data traffic-unit Unit for data flows
Packet traffic-unit Unit for data packets
Table 513 Description on the fields of the display hwtacacs command
Field Description