Filter
Top Products
2611
View Voice view
Parameter line-number: Voice subscriber line number.
Description Use the
subscriber-line command to enter analog FXS, FXO, and E&M, or digital
E1/T1 voice subscriber line view.
Use the
subscriber-line line-number command to enter the voice subscriber line
view. For example, if line-number is an FXS voice subscriber line, the system will
enter the FXS voice subscriber line view; if line-number is an analog E&M voice
subscriber line, the system will enter analog E&M voice subscriber line view.
Example # Enter the view of the voice subscriber line 1/0 in voice view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] subscriber-line 1/0
[Sysname-voice-line1/0]
timer dial-interval
Syntax timer dial-interval seconds
undo timer dial-interval
View FXS/FXO/E&M voice subscriber line view
Parameter seconds: Maximum interval in seconds for dialing the next digit, in the range of 1
to 300.
Description Use the
timer dial-interval command to configure the maximum interval for
dialing the next digit.
Use the
undo timer dial-interval command to restore the default setting.
By default, the maximum interval for dialing the next digit is 10 seconds.
This timer will restart each time the subscriber dials a digit and will work in this
way until all the digits of the number are dialed. If the timer expires before the
dialing is completed, the subscriber will be prompted to hook up and the call is
terminated.
Example # Set the maximum duration waiting for the next digit on voice line 1/0 to 5
seconds.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] subscriber-line 1/0
[Sysname-voice-line1/0] timer dial-interval 5