Filter
Top Products
1356 CHAPTER 88: IGMP CONFIGURATION COMMANDS
igmp timer other-querier-present
Syntax igmp timer other-querier-present interval
undo igmp timer other-querier-present
View Interface view
Parameter interval: IGMP other querier present interval in seconds, in the range of 60 to 300.
Description Use the
igmp timer other-querier-present command to configure the IGMP
other querier present interval on the current interface.
Use the
undo igmp timer other-querier-present command to restore the
system default configuration.
By default, the IGMP other querier present interval is [ IGMP query interval ] times
[ IGMP querier robustness variable ] plus [ maximum response time for IGMP
general queries ] divided by two.
n
The three parameters in the above-mentioned formula default to 60 (seconds), 2
(times) and 10 (seconds) respectively, so the default other querier present interval
= 60 × 2 + 10 / 2 = 125 (seconds).
Related command: timer other-querier-present (IGMP view), igmp timer query, igmp
robust-count, igmp max-response-time, display igmp interface.
Example # Set the other querier present interval to 200 seconds on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] igmp timer other-querier-present 200
igmp timer query
Syntax igmp timer query interval
undo igmp timer query
View Interface view
Parameter interval: IGMP query interval in seconds, namely the interval between IGMP
general queries sent by the querier, with an effective range of 1 to 18,000.
Description Use the
igmp timer query command to configure the IGMP query interval on
the current interface.
Use the
undo igmp timer query command to restore the system default.