Filter
Top Products
167
Unknown-speed mode Unknown-speed mode, in which mode speed is
negotiated between the current host and the peer
unknown-duplex mode unknown-duplex mode, in which mode speed is
negotiated between the current host and the peer
Link speed type is autonegotiation Link speed type is autonegotiation
link duplex type is autonegotiation Link duplex type is autonegotiation
Flow-control is not enabled Flow-control is not enabled
The Maximum Frame Length The maximum frame length allowed on an
interface
Broadcast-suppression ratio(%) Broadcast storm suppression ratio (the maximum
ratio of allowed number of broadcast packets to
overall traffic through an interface)
Unicast MAX-ratio Unicast storm suppression ratio (the maximum
ratio of allowed number of unknown unicast
packets to overall traffic over an interface)
Multicast MAX-ratio Multicast storm suppression ratio (the maximum
ratio of allowed number of multicast packets to
overall traffic through an interface)
PVID Default VLAN ID
Mdi type Cable type
Port link-type Interface link type, which could be access, trunk,
and hybrid.
Tagged VLAN ID Identify the VLANs that need Tag markers
Untagged VLAN ID Identify the VLANs that do not need Tag markers
Last 300 seconds input: Average input rate over the last 300 seconds,
among which:
■ packets/sec indicates the average input rate in
terms of the average number of the packets
received per second.
■ bytes/sec indicates the average input rate in
terms of the average number of bytes received
per second.
■ x% indicates the percentage of the average
input rate to the total bandwidth, where -
indicates that the rate is greater than the
maximum value that can be displayed.
Last 300 seconds output Average output rate over the last 300 seconds,
among which:
■ packets/sec indicates the average output rate
in terms of the average number of the packets
output per second.
■ bytes/sec indicates the average output rate in
terms of the average number of bytes output
per second.
■ x% indicates the percentage of the average
output rate to the total bandwidth, where -
indicates that the rate is greater than the
maximum value that can be displayed.
Table 12 Description on the fields of the display interface command (in bridge mode)
Field Description