Filter
Top Products
1992 CHAPTER 130: PACKET FILTER FIREWALL CONFIGURATION COMMANDS
display firewall-statistics
Syntax display firewall-statistics { all | interface interface-type interface-num |
fragments-inspect }
View Any view
Parameter all: Displays the firewall statistics on all interfaces.
interface-type interface-num: Displays the firewall statistics about the specified
interface.
fragments-inspect: Displays statistics about fragments inspection.
Description Use the
display firewall-statistics command to view the statistics of the
firewall.
Related command: firewall fragments-inspect.
n
At most 50 fragments with the same 16-bit identifier in IP header can be recorded.
Example # Display statistics information about fragments inspection.
<Sysname> display firewall-statistics fragments-inspect
Fragments inspection is enabled.
The high-watermark for clamping is 10000.
The low-watermark for clamping is 1000.
Current records for fragments inspection is 0.
firewall default
Syntax firewall default { permit | deny }
Out-bound Policy Indicates an outbound ACL rule has been configured on the interface.
Table 515 Description on the fields of display firewall ethernet-frame-filter
Field Description
Table 516 Description on the fields of the display firewall-statistics command
Field Description
Fragments inspection is enabled The fragments inspection function of
the firewall is enabled
The high-watermark for clamping The high watermark value of the
number of fragment status records
The low-watermark for clamping The low watermark value of the
number of fragment status records
Current records for fragments inspection The current number of records for
fragments inspection