Filter
Top Products
949
View Any view
Parameters None
Description Use the
display ipv6 relay-route command to display IPv6 recursive route
information.
Examples # Display IPv6 recursive route information.
<Sysname> display ipv6 relay-route
Total Number of relay-route is: 1
Dest/Mask: 192::1/64
Related instance id(always 0): 0(1)
display ipv6 relay-tunnel
Syntax display ipv6 relay-tunnel
View Any view
Parameters None
Description Use the
display ipv6 relay-tunnel command to display IPv6 recursive tunnel
information.
Examples # Display IPv6 recursive tunnel information.
<Sysname> display ipv6 relay-tunnel
Total Number of relay-tunnel is: 1.
Dest/Mask: 192::0/64
Related instance id(always 0): 0(1)
Table 212 Description on the fields of the display ipv6 relay-route command
Field Description
Total Number of Relay-route Total number of recursive routes
Dest/Mask Destination address/mask of the recursive route
Related instance id(always 0) IPv6 supports public networks only. Therefore, the
instance ID can be 0 only.
The number in the parentheses after the instance ID
indicates the number of routes that have used the
recursive route in the routing table.
Table 213 Description on the fields of the display ipv6 relay-tunnel command
Field Description
Total Number of Relay-tunnel Total number of recursive tunnels
Dest/Mask Destination address/mask of the recursive tunnel
Related instance id(always 0) IPv6 supports public networks only. Therefore, the
instance ID can be 0 only.
The number in the parentheses after the instance ID
indicates the number of routes that have used the
recursive tunnel in the routing table.