Filter
Top Products
727
Parameter as-ip ip-address: Specifies IP address for the backup network calling processor.
fail-over ip-address dialer-string: Specifies the failover IP address and dialer string.
The dialer-string is a string of 1 to 39 characters, which can be 0 to 9, and “*”.
ncp-ip ip-address: Specifies IP address for the primary network calling processor.
voice-vlan vlan-id: Specifies the voice VLAN ID, in the range of 2 to 4094.
■ disable: Disables the specified voice VLAN ID, meaning DHCP clients will not
take this ID as their voice VLAN.
■ enable: Enables the specified voice VLAN ID, meaning DHCP clients will take
this ID as their voice VLAN.
Description Use the voice-config command to configure specified Option 184 contents in a
DHCP address pool.
Use the
undo voice-config command to remove specified option 184 contents
from a DHCP address pool.
By default, no Option 184 content is configured.
Note that specifying the IP address of a network calling processor first is necessary
to make other configured parameters take effect.
Example # Configure Option 184 in DHCP address pool 0: the primary network calling
processor 10.1.1.1, backup network calling processor 10.2.2.2, voice VLAN ID 3
that is enabled, the failover IP address 10.3.3.3 and dialer string 99*.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] voice-config ncp-ip 10.1.1.1
[Sysname-dhcp-pool-0] voice-config as-ip 10.2.2.2
[Sysname-dhcp-pool-0] voice-config voice-vlan 3 enable
[Sysname-dhcp-pool-0] voice-config fail-over 10.3.3.3 99*