Filter
Top Products
1518 CHAPTER 95: MPLS BASICS CONFIGURATION COMMANDS
DU Re-advertise Timer : 30 Sec DU Re-advertise Flag : On
DU Explicit Request : Off Request Retry Flag : On
Label Distribution Mode: Ordered Label Retention Mode : Liberal
-----------------------------------------------------------------
display mpls ldp cr-lsp
Syntax display mpls ldp cr-lsp [ lspid lsr-id lsp-id ] [ | { begin | exclude | include }
regular-expression ]
View Any view
Parameter lsr-id: MPLS LSR ID of the device, in the format of IP address.
lsp-id: Local LSP ID of the ingress, in the range 0 to 65,535.
|: Filters the output information.
begin: Begins with the specified string.
include: Includes the specified string.
exclude: Excludes the specified string.
Table 370 Description on the fields of the display mpls ldp command
Field Description
LDP Global Information Global LDP information
Protocol Version Version of the LDP protocol
Neighbor Liveliness GR neighbor Keepalive timer
Graceful Restart Whether GR is enabled
FT Reconnect Timer FT reconnection timer of GR
Recovery Timer Restore timer of GR
MTU Signaling Whether MTU signaling is supported
LDP Instance Information Information about LDP instances
Instance ID Sequence number of the LDP instance
VPN-Instance Name of the LDP-enabled VPN instance. For the default
instance, nothing is displayed.
Instance Status Status of the LDP instance
LSR ID ID of the LSR
Hop Count Limit Maximum hop count
Loop Detection Whether loop detection is enabled
Path Vector Limit Path vector maximum hop count
DU Re-advertise Flag Whether label readvertisement is enabled for DU mode
DU Re-advertise Timer Label readvertisement timer for DU mode
Request Retry Flag Whether request retransmission is enabled
DU Explicit Request Whether explicit request transmission is enabled for DU
mode
Label Retention Mode Label retention mode configured for the instance
Label Distribution Mode Label distribution mode configured for the instance