Filter
Top Products
812 CHAPTER 61: IP UNICAST POLICY ROUTING CONFIGURATION COMMANDS
display ip policy-based-route statistics
Syntax display ip policy-based-route statistics { interface interface-type interface-number |
local }
View Any view
Parameters interface interface-type interface-number: Displays statistics of interface policy
routing enabled on the interface specified by the argument interface-type
interface-number.
local: Displays statistics of enabled system policy routing.
Description Use the
display ip policy-based-route statistics command to display policy
routing statistics.
Examples # Display statistics of interface policy routing enabled on interface Ethernet1/0.
<Sysname> display ip policy-based-route statistic interface ethernet1/0
Interface Ethernet1/0 policy based routing statistics information:
policy-based-route: aaa
permit node 5
apply output-interface ethernet 1/0
Denied: 0,
Forwarded: 0
Total denied: 0, forwarded: 0
policy-based-route pr01 The referenced policy name is pr01.
permit node 1 The match mode is permit and the
policy consists of only node 1.
if-match acl 3101 Packets satisfying ACL 3101 are
matched.
apply output-interface Ethernet1/0 The outgoing interface of matched
packets is Ethernet1/0.
Table 166 Description on fields of the display ip policy-based-route setup command
Field Description
Table 167 Description on fields of display ip policy-based-route statistic command
Field Description
Interface Ethernet1/0 policy based routing
statistics information
Statistics of policy routing enabled on interface
Ethernet1/0.
policy-based-route: aaa The policy name is aaa.
permit node 5 The match mode of node 5 is permit.
apply output-interface ethernet 1/0 The outgoing interface of matched packets is
Ethernet1/0.
Denied: 0, Forwarded: 0 Unsuccessfully/successfully forwarded packets
that match node 5
Total denied: 0, forwarded: 0 Unsuccessfully/successfully forwarded packets
that match all nodes of policy aaa