Filter
Top Products
2492 CHAPTER 166: POE CONFIGURATION COMMANDS
PSE Average Power : 20 W
PSE Peak Power : 240 W
PSE Max Power : 200 W
PSE Remaining Guaranteed : 120 W
PSE CPLD Version : 100
PSE Software Version : 200
PSE Hardware Version : 100
PSE Legacy Detection : disable
PSE Utilization-threshold : 80
PSE Pse-policy Mode : disable
PSE Pd-policy Mode : disable
PSE PD Disconnect Detect Mode : DC
display poe-power
Syntax display poe-power
View Any view
Table 644 Description on fields of the display poe pse command
Field Description
PSE ID ID of the PSE
PSE Slot No Slot number of the PSE
PSE Model Model of the PSE module
PSE Power Enabled PoE is enabled for the PSE
PSE Power Preempted PSE power preempted state
■ no: The power of the PSE is not preempted.
■ yes: The power of the PSE is preempted so that it can
supply power, although PoE is enabled for the PSE.
PSE Power Priority Power priority of the PSE
PSE Current Power Current power of the PSE
PSE Average Power Average power of the PSE
PSE Peak Power Peak power of the PSE
PSE Max Power Maximum power of the PSE
PSE Remaining Guaranteed Guaranteed remaining power of the PSE = Maximum
power of the PSE- the sum of the maximum power of the
critical PoE interfaces of the PSE
PSE CPLD Version PSE CPLD version
PSE Software Version PSE software version number
PSE Hardware Version PSE hardware version number
PSE Legacy Detection Nonstandard PD detection by the PSE:
■ enable: Enabled
■ disable: Disabled
PSE Utilization-threshold PSE power alarm threshold
PSE Pse-policy Mode PSE power management policy mode
PSE Pd-policy Mode PD power management policy mode
PSE PD Disconnect Detect Mode PD disconnection detection mode