Filter
Top Products
1284 CHAPTER 84: IPV6 OSPFV3 CONFIGURATION COMMANDS
display ospfv3 lsdb
Syntax display ospfv3 [ process-id ] lsdb [[external | inter-prefix | inter-router |
intra-prefix | link | network | router ] [ link-state-id ] [ originate-router router-id ] |
total ]
View Any view
Parameters process-id: Specifies ID of an OSPFv3 process, ranging from 1 to 65535.
external: Specifies to display information about AS-external LSAs.
inter-prefix: Specifies to display information about Inter-area-prefix LSAs.
inter-router: Specifies to display information about Inter-area-router LSAs.
intra-prefix: Specifies to display information about Intra-area-prefix LSAs.
link: Specifies to display information about Link-LSAs.
network: Specifies to display information about Network-LSAs.
router: Specifies to display information about Router-LSAs.
link-state-id: Link state ID, an IPv4 address.
originate-router router-id: The ID of the advertising router.
total: Specifies to display all information in the LSDB.
Description Use the
display ospfv3 lsdb command to display OSPFv3 LSDB information.
Examples # Display OSPFv3 LSDB information.
<Sysname> display ospfv3 lsdb
OSPFv3 Router with ID (5.5.5.5) (Process 1)
Link-LSA (Interface Ethernet1/0)
----------------------------------------------------------------
Link State ID Origin Router Age SeqNum CkSum Prefix
0.15.0.9 5.5.5.5 0304 0x80000001 0x5b6a 1
0.15.0.9 6.6.6.6 0311 0x80000001 0x6956 1
Router-LSA (Area 0.0.0.0)
Timer interval configured, Hello: 10, Dead: 40,
Wait: 40, Retransmit: 5
Time intervals in seconds configured on the
interface, Hello: 10, Dead: 40, Wait: 40,
Retransmit: 5
Hello due in 00:00:02 Hello packet will be sent in 2 seconds
Neighbor Count Number of Neighbors on the interface
Adjacent neighbor count Number of Adjacencies on the interface
Table 299 Description on the fields of the display ospfv3 interface command
Field Description