Filter
Top Products
2181
bits and defaults to 1024. If the key pair already exists, the system will ask you
whether you want to overwrite it.
■ The configuration of this command can survive a reboot. You only need to
configure it once.
Related command: public-key local destroy, display public-key local.
Example # Create local RSA key pair.
<Sysname> system-view
[Sysname] public-key local create rsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It may take a few minutes.
Press CTRL+C to abort.
Input the bits in the modulus [default = 1024]:
Generating keys...
........++++++
....................................++++++
.......++++++++
......................++++++++
.
# Create local DSA key pair.
<Sysname> system-view
[Sysname] public-key local create dsa
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Press CTRL+C to abort.
Input the bits in the modulus[default = 1024]:
Generating keys...
.++++++++++++++++++++++++++++++++++++++++++++++++++*
........+......+.....+......................................+..+....
...................+..........+..............+.............+...+....
.+...............+..+......+.................+..........+...+....+..
.....+.....+............+.........+.........................+.......
.+..........+..............+.....+...+........................+.....
....+..........+...........+........+....+.......................+++
++++++++++++++++++++++++++++++++++++++++++++++++*
.
n
■ Pressing CTRL+C quits the session of generating the local RSA key pair rather
than aborting the generation of the local RSA key pair.
■ Be sure to press CTRL+C before inputting the bits in the modulus.
public-key local destroy
Syntax public-key local destroy { dsa | rsa }
View System view