Filter
Top Products
2446 CHAPTER 163: INFORMATION CENTER CONFIGURATION COMMANDS
undo terminal debugging
View User view
Parameter None
Description Use the
terminal debugging command to enable the display of debug
information on the current terminal.
Use the
undo terminal debugging command to disable the display of debug
information on the current terminal.
By default, the display of debug information on the current terminal is disabled.
Note that the debug information is displayed (using the terminal debugging
command) only after the monitoring of system information is enabled on the
current terminal first (using the terminal monitor command).
Example # Enable the display of debug information on the current terminal.
<Sysname> terminal debugging
% Current terminal debugging is on
terminal logging
Syntax terminal logging
undo terminal logging
View User view
Parameter None
Description Use the
terminal logging command to enable the display of log information on
the current terminal.
Use the
undo terminal logging command to disable the display of log
information on the current terminal.
By default, the display of log information on the current terminal is disabled.
Note that the log information is displayed (using the terminal logging command)
only after the monitoring of system information is enabled on the current terminal
first (using the terminal monitor command).
Example # Disable the display of log information on the current terminal.
<Sysname> undo terminal logging
% Current terminal logging is off