Filter
Top Products
1374 CHAPTER 89: MSDP CONFIGURATION COMMANDS
Use the undo peer connect-interface command to remove an MSDP peer
connection.
No MSDP peer connection is created by default.
Be sure to carry out this command before you use any other peer command;
otherwise the system will prompt that the peer does not exist.
Related command: static-rpf-peer.
Example # Configure the router with the IP address of 125.10.7.6 in the public instance as
the MSDP peer of the local router, with interface Ethernet 1/0 as the local
connection port.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 connect-interface ethernet 1/0
peer description
Syntax peer peer-address description text
undo peer peer-address description
View Public instance MSDP view, VPN instance MSDP view
Parameter peer-address: MSDP peer address.
text: Descriptive text, a string of 1 to 80 characters (case sensitive).
Description Use the
peer description command to configure the description information for
the specified MSDP peer.
Use the
undo peer description command to delete the configured description
information of the specified MSDP peer.
By default, an MSDP peer has no description information.
Related command: display msdp peer-status.
Example # In the public instance, add the descriptive text “Router CstmrA” for the router
with the IP address of 125.10.7.6 to indicate that this router is Customer A.
<Sysname> system-view
[Sysname] msdp
[Sysname-msdp] peer 125.10.7.6 description Router CstmrA
peer mesh-group
Syntax peer peer-address mesh-group name