Filter
Top Products
1583
display mpls rsvp-te sender
Syntax display mpls rsvp-te sender [ interface interface-type interface-number ] [ | { begin |
include | exclude } regular-expression ]
View Any view
Parameter interface interface-type interface-number: Specifies an interface by its type and
number.
|: Filters output by regular expression.
begin: Displays information beginning with a defined regular expression.
include: Displays information that includes a defined regular expression.
exclude: Displays information that excludes a defined regular expression.
regular-expression: Regular expression, a string of 1 to 80 characters without
spaces.
Description Use the
display mpls rsvp-te sender command to display RSVP-TE sender
message information.
Example # Display the RSVP-TE sender message information on interface Ethernet 1/0.
<Sysname> display mpls rsvp-te sender interface ethernet 1/0
Interface Ethernet1/0;
Tunnel Dest: 29.29.29.29 Ingress LSR ID: 19.19.19.19
LSP ID: 1 Session Tunnel ID: 1
Session Name: Tunnel0
Previous Hop Address: 101.101.101.1
Token bucket rate: 0.0 Token bucket size: 0.00
# Display the RSVP-TE sender message information on all interfaces.
<Sysname> display mpls rsvp-te sender
Interface: Ethernet1/0
Tunnel Dest: 19.19.19.19 Ingress LSR ID: 29.29.29.29
LSP ID: 1 Session Tunnel ID: 0
Session Name: Tunnel0
Previous Hop Address: 101.101.101.2
Token bucket rate: 0.0 Token bucket size: 0.00
Interface: Incoming-Interface at the Ingress
QOS service QoS guarantee/control
Resv Message Reservation message received on a particular interface from next
hop (X.X.X.X)
Graceful Restart State State of GR: stale or normal. Displayed as --- when not supported by
the device.
Table 401 Description on the fields of display mpls rsvp-te rsb content
Field Description