Filter
Top Products
2662 CHAPTER 175: E1 AND T1 CONFIGURATION COMMANDS
[Sysname-e1 1/0] cas 0
[Sysname-cas 1/0:0] re-answer enable
register-value
Syntax register-value { billingcategory | callcreate-in-groupa | callingcategory | congestion
| demand-refused | digit-end | nullnum | req-billingcategory |
req-callednum-and-switchgroupa | req-callingcategory | req-
currentcallednum-in-groupc | req-currentdigit | req- firstcallednum-in-groupc |
req-firstcallingnum | req-firstdigit | req-lastfirstdigit | req-lastseconddigit |
req-lastthirddigit | req-nextcallednum | req-nextcallingnum | req-switch-groupb |
subscriber-abnormal |subscriber-busy | subscriber-charge |subscriber-idle } value
undo register-value { billingcategory | callcreate-in-groupa | callingcategory |
congestion | demand-refused | digit-end | nullnum | req-billingcategory |
req-callednum-and-switchgroupa | req-callingcategory | req-
currentcallednum-in-groupc | req-currentdigit | req- firstcallednum-in-groupc |
req-firstcallingnum | req-firstdigit | req-nextcallednum | req-nextcallingnum |
req-lastfirstdigit | req-lastseconddigit | req-lastthirddigit | req-nextcallednum |
req-
nextcallingnum | req-specialsignal | req-switch-groupb | subscriber-abnormal
|subscriber-busy | subscriber-charge |subscriber-idle }
View R2 CAS view
Parameter billingcategory value: Specifies the billing category value, in the range 1 to 16. It
configures the KA signal in R2 signaling. The KA signal is sent by the originating
point forward to the originating toll office or originating international exchange to
indicate calling category. The signal provides two types of information for this call
connection: billing category (regular, immediate, or toll free) and subscriber level
(with or without priority).
callcreate-in-groupa value: Specifies the direct call setup signal value, in the
range 1 to 16.
callingcategory value: Specifies the calling category signal value, in the range 1
to 16. It configures the R2 KD signal. It functions to identify whether break-in and
forced- release can be implemented by or on the calling party.
congestion value: Specifies the congestion signal value, in the range 1 to 16.
demand-refused value: Specifies the request-refused signal value, in the range 1
to 16.
digit-end value: Specifies the digit-end signal value, in the range 1 to 16.
nullnum value: Specifies the null number signal value, in the range 1 to 16.
req-billingcategory value: Specifies the send billing category signal value, in the
range 1 to 16.
req-callednum-and-switchgroupa value: Specifies the send last digit and
changeover to Group A signal value, in the range 1 to 16.