Filter
Top Products
916 CHAPTER 70: TERMINAL ACCESS CONFIGURATION COMMANDS
By default, no source IP address is configured globally for TCP connections.
n
■ You can use this command to configure an IP address other than the outbound
interface’s IP address of the initiating router as the TCP connection source IP
address. Generally, the loopback interface or dialer interface of the router are
used as the TCP connection source IP address for dial-up backup and address
hiding.
■ If a source IP address is also configured in a terminal template, this address is
preferred as the source IP address for the corresponding terminal to establish
TCP connections.
■ After the global TCP connection source IP address is configured, a TCP
connection must be reestablished for this address to take effect.
Example # Set the global TCP connection source IP address to 1.1.1.1.
<Sysname> system-view
[Sysname] rta source-ip 1.1.1.1
rta template
Syntax rta template template-name
undo rta template template-name
View System view
Parameters template-name: Terminal template name, a string of 1 to 15 characters.
Description Use the
rta template command to create a terminal template and enter terminal
template view. If you specify an existing terminal template, you will enter the
corresponding terminal template view.
Use the
undo rta template command to delete a terminal template.
Example # Create terminal template abc and enter terminal template view.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc]
rta terminal
Syntax rta terminal template-name terminal-number
undo rta terminal
View Interface view
Parameters template-name: Terminal template name, a string of 1 to 15 characters.