Filter
Top Products
2414 CHAPTER 162: BASIC CONFIGURATION COMMANDS
controller E1 6/0
#
controller E1 6/1
pri-set
#
controller E1 6/2
pri-set
#
controller E1 6/3
using e1
#
return
# Display the configuration beginning with “user”.
<Sysname> display current-configuration | begin user
user-interface aux 0
user-interface vty 0 4
display diagnostic-information
Syntax display diagnostic-information
View Any view
Parameter None
Description Use the
display diagnostic-information command to display or save the
statistics of each module’s running status in the system.
When the system is out of order, you need to collect a lot of information to locate
the problem. At this time you can use the display diagnostic-information
command to collect prompt information of the commands display clock, display
version, display device, display current-configuration.
Example # Save the statistics of each module’s running status in the system.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)?[Y/N]y
Please input the file name(*.diag)[flash:/default.diag]:aa.diag
Diagnostic information is outputting to flash:/aa.diag.
Please wait...
Save succeeded.
You can view the content of the file aa.diag by executing the more.aa.diag
command in user view, in combination of the <Page Up> and <Page Down> keys.
# Display the statistics of each module’s running status in the system.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)?[Y/N]n