Filter
Top Products
903
Description Use the display rta command to display information about terminals.
Relate command: reset rta statistics.
Example # Display the information about the terminal VTY1.
<Sysname> display rta 1 1
VTY 1
APP Index: 0
APP Type: TTY
APP Name: (null)
APP State: Kept
Remote IP: 192.168.0.110
Source IP: 0.0.0.0
Actual Source IP: 0.0.0.0
Remote Port: 9010
Local Port: 0
Encrypt Now: no
Receive remote buffer address: 593c904
Receive buffer head: 499
Receive buffer tail: 499
Time from APP is linked till now: 00h00m00s
# Display brief information about TTY 1.
<Sysname> display rta 1 brief
TTY 1
Table 196 Description on the fields of the display rta terminal-number vty-number
command
Field Description
APP Index Application index
APP Type Application type: TTY, Telnet, RTC client, or RTC server
APP Name Application name. It defaults to “null”.
APP State Application state: Kept, Linking, Linked, Disconnect, meaning
respectively not connected, being connected, connected,
disconnected.
Remote IP Remote IP address
Source IP Source IP address, namely, the source IP address configured for
the VTY under the terminal template
Actual Source IP Actual source IP address, namely, the source IP address used for
establishing a connection. This field applies only when the global
source IP address for terminal access is configured or when the
source IP address is configured for the VTY under the terminal
template. In any other cases, it is 0.0.0.0.
Remote Port Remote port
Local Port Local port
Encrypt Now Whether to encrypt data
Receive remote buffer
address
Buffer address for receiving remote data
Receive buffer head Receive buffer head
Receive buffer tail Receive buffer tail
Time from APP is linked till
now
Time since the application was connected