Filter
Top Products
1337
-2 4.4.4.7
Incoming interface address: 6.6.6.7
Previous-hop router address: 0.0.0.0
Input packet count on incoming interface: 2
Output packet count on outgoing interface: 259
Total number of packets for this source-group pair: 8100
Protocol: PIM
Forwarding TTL: 0
Forwarding code: No error
multicast boundary
Syntax multicast boundary group-address { mask | mask-length }
undo multicast boundary { group-address { mask | mask-length } | all }
View Interface view
Parameter group-address: Multicast group address, in the range of 224.0.0.0 to
239.255.255.255.
mask: Mask of the multicast group address.
mask-length: Mask length of the multicast group address, in the range of 4 to 32.
all: Specifies to remove all forwarding boundaries configured on the interface.
Description Use the
multicast boundary command to configure a multicast forwarding
boundary.
Table 327 Description on the fields of the mtracert command
Field Description
last-hop router Last-hop router
(6.6.6.6, 225.2.1.1) The (S, G) multicast stream for which the forwarding path is
being traced
-1 5.5.5.8 The (S, G) outgoing interface address of each hop, starting
from the last-hop router
Incoming interface address The address of the interface on which the (S, G) packets arrive
Previous-hop router address The IP address of the router from which this router receives
packets from this source
Input packet count on
incoming interface
The total number of multicast packets received on the
incoming interface
Output packet count on
outgoing interface
The total number of multicast packets transmitted for
transmission on the outgoing interface
Total number of packets for
this source-group pair
The total number of packets from the specified source
forwarded by this router to the specified group
Protocol The multicast routing protocol in use between this router and
the previous hop router
Forwarding TTL The minimum TTL that a packet is required to have before it
can be forwarded over the outgoing interface
Forwarding code Forwarding code