Filter
Top Products
1659
# Display information about remote CEs of L2VPN vpn1.
<Sysname> display mpls l2vpn vpn-name vpn1 remote-ce
no. ce-id peer-id route-distinguisher LB
1 4 3.3.3.9 100:1 132096/0/10
display mpls l2vpn connection
Syntax display mpls l2vpn connection [ vpn-name vpn-name [ remote-ce ce-id | down | up |
verbose ]]
display mpls l2vpn connection [ interface interface-type interface-number |
summary]
View Any view
Parameter vpn-name: VPN name, a case insensitive string of 1 to 31 characters that cannot
include the character of “-”.
ce-id: ID of the remote CE for the L2VPN connection, in the range 0 to 249.
down: Displays detailed information about the connections that are down.
up: Displays detailed information about the connections that are up. If you specify
neither the down nor the up keyword, the command displays detailed
information about connections that are either up or down.
verbose: Displays detailed information. This keyword is valid only when displaying
information about all connections in a VPN.
interface interface-type interface-number: Specifies an interface by its type and
number.
summary: Displays summary information about connections.
Description Use the
display mpls l2vpn connection command to display information
about Kompella L2VPN connections.
LB Label block
Table 436 Description on the fields of display mpls l2vpn vpn-name remote-ce
Field Description
no Sequence number
ce-id CE ID
peer-id IP address of the peer
route-distinguisher RD
LB Label block
Table 435 Description on the fields of display mpls l2vpn vpn-name local-ce
Field Description