Filter
Top Products
380 CHAPTER 22: FRAME RELAY CONFIGURATION COMMANDS
display interface mfr
Syntax display interface mfr [ interface-number | interface-number.subnumber ]
View Any view
Parameter interface-number: MFR interface number, in the range 0 to 1023.
interface-number.subnumber: MFR subinterface number, of which,
interface-number is the main interface number, and subnumber is subinterface
number. The subnumber argument ranges from 0 to 1023.
Description Use the
display interface mfr command to display the information about an
MFR interface or an MFR sub-interface, including configuration, state, and packet
statistics.
If you do not specify an MFR interface or an MFR sub-interface, this command
displays the information about all the MFR interfaces.
Example # Display the configuration and status information about interface MFR4.
<Sysname> display interface mfr 4
MFR4 current state : UP
Line protocol current state : UP
Description : MFR4 Interface
The Maximum Transmit Unit is 1500, Hold timer is 10(sec)
Internet Address is 12.12.12.2/16 Primary
Link layer protocol is FR IETF
LMI DLCI is 0, LMI type is Q.933a, frame relay DTE
LMI status enquiry sent 435, LMI status received 435
LMI status timeout 0, LMI message discarded 0
Physical is MFR, baudrate: 2048000 bps
Output queue: (Urgent queue: Size/Length/Discards) 0/50/0
Output queue: (Protocol queue: Size/Length/Discards) 0/500/0
Output queue: (FIFO queuing: Size/Length/Discards) 0/75/0
Last 300 seconds input: 0 bytes/sec, 0 packets/sec
Last 300 seconds output: 0 bytes/sec, 0 packets/sec
1058 packets input, 832389 bytes, 0 drops
619 packets output, 828190 bytes, 0 drops
Table 49 Description on the fields of the display interface mfr command
Field Description
MFR4 current state : UP Physical layer state
Line protocol current state : UP Link layer state
Description : MFR4 Interface Interface description
The Maximum Transmit Unit is 1500 MTU
Internet Address is 12.12.12.2/16 IP address and mask
link-protocol is FR IETF Link layer protocol
LMI DLCI is 0, LMI type is Q.933a, frame relay DTE DLCI number used by LMI, LMI type,
port type and operating mode