Filter
Top Products
2138 CHAPTER 140: IPSEC CONFIGURATION COMMANDS
seq-number: Sequence number for the IPSec policy template, in the range 1 to
10000.
Description Use the
ipsec policy-template command to create an IPSec policy template and
enter the IPSec policy template view.
Use the
undo ipsec policy-template command to delete the specified IPSec
policy template(s).
By default, no IPSec policy template exists.
Note that:
■ Using the undo command without the seq-number argument deletes an IPSec
policy template group.
■ In an IPSec policy template group, an IPSec policy template with a smaller
sequence number has a higher priority.
Related command: display ipsec policy-template.
Example # Create an IPSec policy template with the name template1 and the sequence
number 100.
<Sysname> system-view
[Sysname] ipsec policy-template template1 100
[Sysname-ipsec-policy-template-template1-100]
ipsec proposal
Syntax ipsec proposal proposal-name
undo ipsec proposal proposal-name
View System view
Parameter proposal-name: Name for the proposal, a case insensitive string of 1 to 15
characters.
Description Use the
ipsec proposal command to create an IPSec proposal and enter its view.
Use the
undo ipsec proposal command to delete an IPSec proposal.
By default, no IPSec proposal exists.
Note that an IPSec proposal created by using the ipsec proposal command takes
the security protocol of ESP, the encryption algorithm of DES, and the
authentication algorithm of MD5 by default.
Related command: display ipsec proposal.