Filter
Top Products
115
By default, the line coding format of an ATM E1 interface is HDB3, and that of an
ATM T1 interface is B8ZS.
Example # Set the line coding format to AMI for ATM 5/0 interface.
<Sysname> system-view
[Sysname] interface atm 5/0
[Sysname-Atm5/0] code ami
differential-delay
Syntax differential-delay milliseconds
undo differential-delay
View IMA group interface view
Parameter milliseconds: Maximum differential delay, in the range 25 to 100 milliseconds.
Description Use the
differential-delay command to set the maximum differential delay for
the member links in the IMA group.
Use the
undo differential-delay command to restore the default, that is, 25
milliseconds.
Example # Set the maximum differential delay for the member links in IMA group 1 to 25
milliseconds.
<Sysname> system-view
[Sysname] interface atm 5/0
[Sysname-Atm5/0] ima ima-group 1
[Sysname-Atm5/0] interface ima-group 5/1
[Sysname-Ima-group5/1] differential-delay 25
display interface ima-group
Syntax display interface ima-group [ group-interfacenumber ]
View Any view
Parameter group-interfacenumber: IMA group interface number.
Description Use the
display interface ima-group command to display the configuration
and status information about an IMA group interface or all the IMA group
interfaces.
If you specify the group-interfacenumber argument, this command displays the
configuration and status information about the IMA group interface identified by
the argument. Otherwise, this command displays the configuration and status
information about all the IMA group interfaces.