Filter
Top Products
1744 CHAPTER 102: DVPN TUNNEL CONFIGURATION COMMANDS
Private IP: 10.0.0.22
Public IP: 28.1.1.22
Tunnel type: Hub-Spoke
State: SUCCESS
Holding time: 0h 44m 9s
Input: 279 packets, 100 data packets, 179 control packets
91 multicasts, 0 errors
Output: 273 packets, 99 data packets, 174 control packets
91 multicasts, 0 errors
dvpn session dumb-time
Syntax dvpn session dumb-time time-interval
undo dvpn session dumb-time
View Tunnel interface view
Parameter time-interval: Quiet period after the DVPN tunneling fails in seconds, in the range
10 to 600.
Description Use the
dvpn session dumb-time command to configure the quiet period
when the attempts for DVPN tunneling reach the maximum value. After the quiet
period elapsed, the device initiates a new DVPN tunneling.
Use the
undo dvpn session dumb-time command to restore the default.
By default, the quiet period is 120 seconds.
Note that the VAM client triggers the quiet timer only when the attempts for
tunneling the Hub reach the maximum value.
Table 467 Description on the fields of the display dvpn session command
Field Description
Interface DVPN tunnel interface
Total number Total number of DVPN tunnels established on the tunnel interface
Private IP Private address of the DVPN tunnel peer
Public IP Public address of the DVPN tunnel peer
Tunnel type Type of the DVPN tunnel
State Status of the DVPN tunnel, which can be SUCCESS, ESTABLISH, or
DUMB.
■ SUCCESS: Indicates that the tunnel is already established.
■ ESTABLISH: Indicates that the tunnel is being established.
■ DUMB: Indicates that the tunnel failed to be established and is now
quiet.
Holding time Length of time that the tunnel is in the current state
Input Statistics about inbound packets, including the counts of all packets, data
packets, control packets, multicast packets, and erroneous packets.
Output Statistics about outbound packets, including the counts of all packets,
data packets, control packets, multicast packets, and erroneous packets.