Filter
Top Products
2364 CHAPTER 156: CONFIGURATION FILE MANAGEMENT COMMANDS
has both the main and backup attributes, the command erases its backup
attribute.
c
CAUTION: This command will permanently delete the configuration file on the
device. Use it with caution.
Related command: save, display saved-configuration.
Example # Erase the configuration file saved in the storage device. (main/backup attribute
not supported)
<Sysname> reset saved-configuration
The saved configuration will be erased.
Are you sure? [Y/N]:y
Configuration in the device is being cleared.
Please wait .......
Configuration in the device is cleared.
# Erase the configuration file saved in the storage device. (main/backup attribute
supported)
<Sysname> reset saved-configuration backup
The saved configuration will be erased.
Are you sure? [Y/N]:y
Configuration in the device is being cleared.
Please wait .......
Configuration in the device is cleared.
restore startup-configuration
Syntax restore startup-configuration from src-addr src-filename
View User view
Parameter src-addr: IP address or name of a TFTP server. The address cannot be an IPv6
address.
src-filename: Filename of the configuration file to be downloaded from the
specified server.
Description Use the
restore startup-configuration command to download the
configuration file from the specified TFTP server for the next startup of the device.
■ This command will download the configuration without copying it to the
backup board.
■ If a device supports main/backup configuration file, the file downloaded is the
main configuration file.
■ If a device does not support main/backup configuration file, the command
downloads the configuration file for next startup.
If the file to be downloaded has the same filename as an existing file on the main
or backup board, you will be prompted whether you want to overwrite the