Filter
Top Products
2268 CHAPTER 149: NQA CLIENT CONFIGURATION COMMANDS
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-echo
[Sysname-nqa-admin-test-udp-echo] destination port 9000
display nqa
Syntax display nqa { result | history } [ admin-name operation-tag ]
View Any view
Parameter result: Displays the results of the last test.
history: Displays the history records of a test.
admin-name: Specifies the name of the administrator who creates NQA
operations, a string of 1 to 32 characters. It is case-insensitive.
operation-tag: Specifies the test operation tag, a string of 1 to 32 characters. It is
case-insensitive.
Description Use the
display nqa command to display operation information of an NQA test
or tests.
If neither of the test group arguments (admin-name and operation-tag) is
specified, information of all test groups is displayed.
Example # Display the results of the last test.
<Sysname> display nqa result administrator jitter
NQA entry(admin administrator, tag jitter) test results:
Destination IP address: 192.168.0.81
Send operation times: 10 Receive response times: 0
Min/Max/Average round trip time: 0/0/0
Square-Sum of round trip time: 0
Last succeeded probe time: 0-00-00 00:00:00.0
Extend results:
Packet lost in test: 100%
Failures due to timeout: 10
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
UDP-jitter results:
RTT number: 0
SD max delay: 0 DS max delay: 0
Min positive SD: 0 Min positive DS: 0
Max positive SD: 0 Max positive DS: 0
Positive SD number: 0 Positive DS number: 0
Positive SD sum: 0 Positive DS sum: 0
Positive SD average: 0 Positive DS average: 0
Positive SD square sum: 0 Positive DS square sum: 0
Min negative SD: 0 Min negative DS: 0
Max negative SD: 0 Max negative DS: 0
Negative SD number: 0 Negative DS number: 0
Negative SD sum: 0 Negative DS sum: 0