Filter
Top Products
1802 CHAPTER 110: DEFINING POLICY COMMANDS
View Any view
Parameters system-defined: Policy pre-defined by the system.
user-defined: Policy pre-defined by the user.
policy-name: Policy name. If it is not specified, the configuration information of all
the policies pre-defined by the system or by the user will be displayed.
tcl-name: Class name in the policy.
Description Use the
display qos policy command to display the configuration information
of the specified class or all the classes and associated behaviors in the specified
policy or all policies.
Examples # Display the configuration information of the specified class or all the classes and
associated behaviors in the user-defined policy.
<Sysname> display qos policy user-defined
User Defined QoS Policy Information:
Policy: test
Classifier: default-class
Behavior: be
-none-
Classifier: USER1
Behavior: USER1
Marking:
Remark IP Precedence 3
Committed Access Rate:
CIR 200 (kbps), CBS 15000 (byte), EBS 0 (byte)
Conform Action: pass
Exceed Action: discard
Expedited Forwarding:
Bandwidth 50 (Kbps) CBS 1500 (Bytes)
Classifier: database
Behavior: database
Assured Forwarding:
Bandwidth 30 (Kbps)
Discard Method: Tail
Queue Length : 64 (Packets)
General Traffic Shape:
CIR 300 (kbps), CBS 15000 (byte), EBS 0 (byte)
Queue length 50 (Packets)
Marking:
Remark MPLS EXP 3
Table 480 Description on the fields of the display qos policy command
Field Description
Policy Policy name
Classifier Class name. Multiple classes may exist in a policy, each corresponding with a
behavior and multiple matching rules. For details, refer to “traffic classifier”
on page 1789.