Filter
Top Products
1952 CHAPTER 128: RADIUS CONFIGURATION COMMANDS
Related command: display radius scheme.
Example # Define RADIUS scheme radius1 to send data flows and packets destined for the
RADIUS server in kilobytes and kilo-packets.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] data-flow-format data kilo-byte packet kilo-packet
display radius scheme
Syntax display radius scheme [ radius-scheme-name ]
View Any view
Parameter radius-scheme-name: RADIUS scheme name.
Description Use the
display radius scheme command to display the configuration
information of a specified RADIUS scheme or all RADIUS schemes.
Related command: radius scheme.
Example # Display the configurations of all RADIUS schemes.
<Sysname> display radius scheme
------------------------------------------------------------------
SchemeName = systemradius1
Index=0 Type=extended
Primary Auth IP =127.0.0. 1.1.1.1 Port=1645 = 1812 State=block
= active
Primary Acct IP =127.0.0.1 1.1.1.1 Port=1646 = 1813 State=bloc
k = active
Second Auth IP = 0.0.0.0 Port= = 1812 State= = block
Second Acct IP = 0.0.0.0 Port= = 1813 State= = block
Auth Server Encryption Key= Not configured
Acct Server Encryption Key= Not configured
Accounting-On packet disable, send times=5,interval = 3s
Interval for timeout(second) =3
Retransmission times for timeout =3
Interval for realtime accounting(minute) =12
Retransmission times of realtime-accounting packet =5
Retransmission times of stop-accounting packet =500
Quiet-interval(min) =5
Username format =without-domain
Data flow unit =Byte
Packet unit =one
------------------------------------------------------------------
Total 1 RADIUS scheme(s)
Table 510 Description on the fields of the display radius scheme command
Field Description
SchemeName Name of the RADIUS scheme
Index Index number of the RADIUS scheme
Type Type of the RADIUS server