Filter
Top Products
2640 CHAPTER 174: DIAL PLAN CONFIGURATION COMMANDS
View Voice dial program view
Parameter max-number: Maximum number of voice entities found, in the range 1 to 128.
Description Use the
select-rule search-stop command to configure the maximum number
of voice entities found.
Use the
undo select-rule search-stop command to restore the maximum
number of voice entities found to 128.
By default, the maximum number of voice entities found is 128.
The select-rule search-stop command is used to define the maximum number of
qualified voice entities to be found before the search stops. Even if the number of
voice entities meeting call requirements is greater than max-number, the system
will make call attempts to only the maximum number (max-number) of voice
entities that are matched in accordance with rules.
Related command: select-rule rule-order and select-rule type-first.
Example # Configure the maximum number of voice entities found to 5.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] select-rule search-stop 5
select-rule type-first
Syntax select-rule type-first 1st-type 2nd-type 3rd-type
undo select-rule type-first
View Voice dial program view
Parameter 1st-type: Serial number of the type of the first priority, in the range of 1 to 3.
Table 693 describes these values:
2nd-type: Serial number of the type of the second priority, in the range of 1 to 3.
The value must be different from that of 1st-type.
3rd-type: Serial number of the type of the third priority, in the range of 1 to 3. The
value must be different from that of 1st-type and 2nd-type.
Table 693 describes the meanings of these values.
Table 693 Meanings of values
Value Meaning
1 POTS voice entity
2 VoIP voice entity