Filter
Top Products
1528 CHAPTER 95: MPLS BASICS CONFIGURATION COMMANDS
Parameter vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31
characters.
|: Filters the output information.
begin: Begins with the specified string.
include: Includes the specified string.
exclude: Excludes the specified string.
regular-expression: Regular expression, a string of 1 to 80 characters. No blank
space is acceptable.
Description Use the
display mpls ldp vpn-instance command to display information about
a specified VPN instance.
Related command: mpls ldp (system view), mpls ldp (interface view).
Example # Display information about VPN instance vpn1.
<Sysname> display mpls ldp vpn-instance vpn1
LDP Global Information
--------------------------------------------------------------------
Protocol Version : V1 Neighbor Liveness : 60 Sec
Graceful Restart : Off FT Reconnect Timer : 60 Sec
MTU Signaling : On Recovery Timer : 60 Sec
LDP Instance Information
--------------------------------------------------------------------
Instance ID : 1 VPN-Instance : vpn1
Instance Status : Active LSR ID : 1.1.1.9
Hop Count Limit : 32 Path Vector Limit : 32
Loop Detection : Off
DU Re-advertise Timer : 30 Sec DU Re-advertise Flag : On
DU Explicit Request : Off Request Retry Flag : On
Label Distribution Mode : Ordered Label Retention Mode : Liberal
n
For description on the fields of the command output, see Table 370.
display mpls lsp
Syntax display mpls lsp [{incoming-interface | outgoing-interface } interface-type
interface-number ] [ in-label in-label-value ] [ out-label out-label-value ] [ { exclude |
include } dest-addr mask-length ] [ vpn-instance vpn-instance-name ] [ asbr |
protocol { bgp | bgp-ipv6 | crldp | ldp | rsvp-te | static | static-cr }] [egress | ingress
| transit ] [ verbose ]
View Any view
Parameter incoming-interface: Incoming interface of the LSPs.
outgoing-interface: Outgoing interface of the LSPs.