Filter
Top Products
1964 CHAPTER 128: RADIUS CONFIGURATION COMMANDS
Description Use the reset stop-accounting-buffer command to clear the buffered
stop-accounting requests, which get no responses.
Related command: stop-accounting-buffer enable (HWTACACS scheme view), retry
stop-accounting (HWTACACS scheme view), user-name-format
(HWTACACS scheme view), display stop-accounting-buffer.
Example # Clear the buffered stop-accounting requests for user user0001@aabbcc.net.
<Sysname> reset stop-accounting-buffer user-name user0001@aabbcc.net
# Clear the buffered stop-accounting requests in the time range from 0:0:0 to
23:59:59 on August 31, 2006.
<Sysname> reset stop-accounting-buffer time-range 0:0:0-08/31/2002 2
3:59:59-08/31/2006
retry
Syntax retry retry-times
undo retry
View RADIUS scheme view
Parameter retry-times: Maximum number of retransmission attempts, in the range 1 to 20.
Description Use the
retry command to set the maximum number of RADIUS retransmission
attempts.
Use the
undo retry command to restore the default.
The default value for the retry-times argument is 3.
Note that:
■ Because RADIUS uses UDP packets to transmit data, the communication is not
reliable. If the device does not receive a response to its request from the
RADIUS server within the response time-out time, it will retransmit the RADIUS
request. If the number of retransmission attempts exceeds the limit but the
device still receives no response from the RADIUS server, the device regards that
the authentication fails.
■ The maximum number of retransmission attempts multiplied by the RADIUS
server response timeout period cannot be greater than 75.
Related command: radius scheme, timer response-timeout (HWTACACS scheme view).
Example # Set the maximum number of RADIUS request transmission attempts to 5 for
RADIUS scheme radius1.