Filter
Top Products
1899
dot1x
Syntax In system view:
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
In Ethernet interface view:
dot1x
undo dot1x
View System view/interface view
Parameter interface interface-list: Specifies a port list, which can contain multiple ports. The
interface-list argument is in the format of interface-list = { interface-type
interface-number [ to interface-type interface-number ]} & <1-10>, where
Handshake is disabled Indicates whether handshake is
enabled on the port
The port is an authenticator Role of the port
Authenticate Mode is Auto Access control mode for the port
Port Control Type is Mac-based Access control method for the port
Guest VLAN Guest VLAN configured for the port.
The value of 0 means that no guest
VLAN is configured.
Max on-line user number Maximum number of users supported
on the port
EAPOL Packet Number of EAPOL packets received
(Tx) or sent (Rx)
Sent EAP Request/Identity Packets Number of EAP Request/Identity
packets sent
EAP Request/Challenge Packets Number of EAP Request/Challenge
packets sent
EAP Success Packets Number of EAP Success packets sent
Received EAPOL Start Packets Number of EAPOL Start packets
received
EAPOL LogOff Packets Number of EAPOL LogOff packets
received
EAP Response/Identity Packets Number of EAP Response/Identity
packets received
EAP Response/Challenge Packets Number of EAP Response/Challenge
packets received
Error Packets Number of erroneous packets received
Controlled User(s) amount Number of controlled users on the
port
Table 506 Descriptions on the fields of the display dot1x command
Field Description