Filter
Top Products
1521
display mpls ldp Isp
Syntax display mpls ldp lsp [ vpn-instance vpn-instance-name [ destination-address
mask-length ]] [| { begin | exclude | include } regular-expression ]
display mpls ldp lsp all [ | { begin | exclude | include } regular-expression ]
display mpls ldp lsp [ dest-addr mask-length ] [ | { begin | exclude | include }
regular-expression ]
View Any view
Parameter all: Displays information about all LSPs established by LDP.
vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31
characters.
dest-addr: Destination address of the LSP.
mask-length: Length of the mask for the destination address, in the range 0 to 32.
|: Filters the output information.
begin: Begins with the specified string.
include: Includes the specified string.
exclude: Excludes the specified string.
regular-expression: Regular expression, a string of 1 to 80 characters. No blank
space is acceptable.
Description Use the
display mpls ldp lsp command to display information about LSPs
established by LDP.
Table 372 Description on the fields of the display mpls ldp interface command
Field Description
Interface Name Name of an LDP-enabled interface
LDP ID LDP identifier
Transport Address Transport address of the entity, also used for TCP
connection
Entity Status Status of the entity, active or inactive
Interface MTU MTU of the interface
Label Advertisement Mode Label advertisement mode, DoD or DU
Configured Keepalive Timer Value of the configured Keepalive timer
Configured Hello Timer Value of the configured Hello timer
Negotiated Hello Timer Value of the negotiated Hello timer
Hello Message Sent/Rcvd [X/Y] X: Number of Hello messages sent from the interface
Y: Number of Hello messages received by the interface