Filter
Top Products
1473
display pim ipv6 join-prune
Syntax display pim ipv6 join-prune mode { sm [ flags flag-value ] | ssm } [ interface
interface-type interface-number | neighbor ipv6-neighbor-address ] * [ verbose ]
View Any view
Parameter mode: Displays the information of join/prune messages to send in the specified
IPv6 PIM mode. IPv6 PIM modes include sm and ssm, which represent IPv6
PIM-SM and IPv6 PIM-SSM respectively.
flags flag-value: Specifies to display IPv6 PIM routing entries containing the
specified flag(s).Values and meanings of flag-value are as follows:
■ rpt: Specifies routing entries on the RPT.
■ spt: Specifies routing entries on the SPT.
■ wc: Specifies wildcard routing entries.
interface-type interface-number: Displays the information of join/prune messages
to send on the specified interface.
ipv6-neighbor-address: Displays the information of join/prune messages to send to
the specified IPv6 PIM neighbor.
verbose: Displays the detailed information of join/prune messages to send.
Description Use the
display pim join-prune command to view the information about the
join/prune messages to send.
Example # View the information of join/prune messages to send in the IPv6 PIM-SM mode.
<Sysname> display pim ipv6 join-prune mode sm
Expiry Time: 50 sec
Upstream nbr: FE80::2E0:FCFF:FE03:1004 (Ethernet1/1)
1 (*, G) join(s), 0 (S, G) join(s), 1 (S, G, rpt) prune(s)
PIM J/P hold interval Join/prune timeout time
PIM BSR domain border BSR administrative scoping status
(enabled/disabled)
Number of routers on network not using DR priority Number of routers not using the DR
priority field on the subnet where the
interface resides
Number of routers on network not using LAN delay Number of routers not using the LAN
delay field on the subnet where the
interface resides
Number of routers on network not using neighbor
tracking
Number of routers not using neighbor
tracking on the subnet where the
interface resides
Table 358 Description on the fields of the display pim ipv6 interface command
Field Description