Filter
Top Products
384 CHAPTER 22: FRAME RELAY CONFIGURATION COMMANDS
If you do not specify the name argument, this command displays the information
of all the X.25 templates.
Related command: x25 template, x25-template.
Example # Display the configuration of the X.25 template named “vofr”.
<Sysname> display x25 template vofr
Template:vofr
X25 parameters
X121 address:none Modulo:8
Timers
Idle:0 (second) T10/T20:1 T11/T21:200 T12/T22:180 T13/T23:180
Channels
Incoming-only:disable Two-way:1-1024 Outgoing-only:disable
Window size
In:2 Out:2
Packet size
In:128 Out:128
LAPB parameters
Modulo:8 K:7 N1:12056 N2:10
Timers
T1:3000 T2:1500 T3:0
Table 52 Description on t he fields of the display x25 template command
Field Description
X25 parameters X.25-related settings
X121 address X.121 address
Modulo Window modulo, which defaults to 8.
Timers
■ Idle: Maximum idle period of SVCs
■ T10/T20: Delay of the re-start/re-transmission timer
■ T11/T21: Delay of the call request transmission timer
■ T12/T22: Delay of the reset request transmission timer
■ T13/T23: Delay of the clear request transmission timer
Channels
■ Incoming-only: Channel range of incoming-only calls
■ Two-way: Two-way channel range
■ Outgoing-only: Channel range of outgoing-only calls
Window size
■ In: Receiving window size
■ Out: Transmitting window size
Packet size
■ In: Maximum X.25 packet size allowed for receiving
■ Out: Maximum X.25 packet size allowed for transmitting
LAPB parameters LAPB-related settings
Modulo Modulo for numbering LAPB frames
N1 Maximum packet size (in bytes) a DCE/DTE allows
N2 Maximum number of retries allowed for an DTE/DCE to transmit
a packet
Timers T1: Transmission timer
T2: Receiving timer
T3: Idle channel timer