Filter
Top Products
1956 CHAPTER 128: RADIUS CONFIGURATION COMMANDS
display stop-accounting-buffer
Syntax display stop-accounting-buffer { radius-scheme radius-scheme-name | session-id
session-id | time-range start-time stop-time | user-name user-name }
View Any view
Parameter radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name,
which is a string of 1 to 32 characters.
session-id session-id: Specifies a session by its ID. The ID is a string of 1 to 50
characters.
time-range start-time stop-time: Specifies a time range by its start time and end
time in the format of hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
user-name user-name: Specifies a user by the user name, which is a case-sensitive
string of 1 to 80 characters. The format of the user-name argument (for example,
whether the domain name should be included) must comply with that specified
for usernames to be sent to the RADIUS server in the RADIUS scheme.
Description Use the
display stop-accounting-buffer command to display information
about the stop-accounting requests buffered in the device by scheme, session ID,
time range, or user name.
n
If receiving no response after sending a stop-accounting request to a RADIUS
server, the device buffers the request and retransmits it. You can use the retry
stop-accounting command to set the number of allowed transmission attempts.
Related command: reset stop-accounting-buffer, stop-accounting-buffer enable (HWTACACS
scheme view), user-name-format (HWTACACS scheme view), retry
stop-accounting (HWTACACS scheme view).
Example # Display information about the buffered stop-accounting requests from 0:0:0 to
23:59:59 on August 31, 2006.
<Sysname> display stop-accounting-buffer time-range 0:0:0-08/31/2002
23:59:59-08/31/2006
Total find 0 record (0)
State Mismatch Number of errors for mismatching status
Other_Error Number of errors of other types
No-response-acct-stop packet Number of times that no response was received for
stop-accounting packets
Discarded No-response-acct-stop
packet for buffer overflow
Number of stop-accounting packets that were buffered but
then discarded due to full memory
Table 511 Description on the fields of the display radius statistics command
Field Description