Filter
Top Products
2490 CHAPTER 166: POE CONFIGURATION COMMANDS
# Display the power information of all PoE interfaces.
<Sysname> display poe interface power
Interface CurPower PeakPower MaxPower PD Description
(W) (W) (W)
GE2/25 4.4 4.5 4.6 IP Phone on Room 309 for Peter....
GE2/26 4.4 4.5 15.4 IP Phone on Room 409 for Peter Pan
GE2/27 15.0 15.3 15.4 Acess Point on Room 509 for Peter
GE2/28 0 0 0 IP Phone on Room 609 for Peter....
GE2/29 0 0 0 IP Phone on Room 709 for Jack
GE2/30 0 0 0 IP Phone on Room 809 for Alien
--- 3 port(s) on, 23.8(W) consumed, 776.2(W) Remaining ---
display poe power-usage
Syntax display poe power-usage
View Any view
Parameter None
Description Use the
display poe power-usage command to display the power information
of the PoE power and all PSEs.
Example # Display the power information of the PoE power and all PSEs.
<Sysname> display poe power-usage
PoE Current Power : 600 W
PoE Max Power : 2000 W
PoE Max Guaranteed Power : 1000 W
PoE Remaining Allocate Power : 800 W
PoE Remaining Guaranteed Power : 600 W
PoE Total Powered Port Number : 60
Detailed power usage of PSE(s):
PSE ID Max Current Peak Average Remaining Powered
(W) (W) (W) (W) Guaranteed(W) PortNum
1 300 200 230 205 100 20
2 400 300 345 290 200 30
4 500 100 120 110 300 10
Table 642 Description on fields of the display poe interface power command
Field Description
Interface Shortened form of a PoE interface
CurPower Current power of a PoE interface
PeakPower Peak power of a PoE interface
MaxPower Maximum power of a PoE interface
PD Description Description of the PD connected with a PoE interface When the
description contains more than 34 characters, the first 30 characters
followed by four dots will be displayed.
port(s) on Number of PoE interfaces that are supplying power
consumed Power currently consumed by all PoE interfaces
Remaining Total remaining power of the system