Filter
Top Products
507
vt vt-number: Specifies the number of the VT associated to the virtual access (VA)
interface. The user-name argument ranges from 0 to 1023.
Description Use the display virtual-access command to view the information about specific
VA interfaces.
n
VA interfaces are created automatically by the system, and they adopt the settings
of specific VTs. A VA interface can be removed due to failures of lower layer
connections or user intervention.
Example # Display the information about all the VA interfaces adopting the settings of VT 1.
<Sysname> display virtual-access vt 1
Virtual-Template1:0 current state :UP
Line protocol current state :UP
Description : Virtual-Template1:0 Interface
The Maximum Transmit Unit is 1500
Link layer protocol is PPP
LCP opened, MP opened, IPCP opened, OSICP opened
Physical is MP, baudrate: 64000
Output queue : (Urgent queue : Size/Length/Discards) 0/50/0
Output queue : (Protocol queue : Size/Length/Discards) 0/500/0
Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0
Last 300 seconds input: 0 bytes/sec 0 packets/sec
Last 300 seconds output: 0 bytes/sec 0 packets/sec
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
Refer to Table 82 for the description on the fields of the display interface
virtual-access command.
interface mp-group
Syntax interface mp-group mp-number
undo interface mp-group mp-number
View System view
Parameter mp-number: MP group interface number, ranging from 0 to 1023.
Description Use the
interface mp-group command to create an MP group interface or enter
MP group interface view.
Use the
undo interface mp-group command to remove an MP-group interface.
This command need to be used in conjunction with the ppp mp mp-group
command. You can execute the two commands regardless of the order in which
they are executed.
Example # Create MP group 3 interface.