Filter
Top Products
136 CHAPTER 5: G.SHDSL INTERFACE CONFIGURATION COMMANDS
display dsl version
Syntax display dsl version interface atm interface-number
View Any view
Parameter interface-number: Specifies a G.SHDSL interface to view the version and support
capability information about it.
Description Use the
display dsl version command to display the version and support
capability information about the specified G.SHDSL interface.
Example # Display the G.SHDSL version of G.SHDSL interface ATM 5/0.
<Sysname> display dsl version interface atm 5/0
Dsl Line Type: G.SHDSL
ATM SAR Device: 0x823614f1
ATM SAR Revision: 0x02
Chipset Vendor: GSPN
Firmware Rel-Rev: R2.3.1-0
DSP Version: 1
PCB Version: 0.0
CPLD Version: 0.0
Driver Version: 2.0
Hardware Version: 1.0
ITU G991.2 ANNEX A: Supported
ITU G991.2 ANNEX B: Supported
Rmt Provider Code Remote code of the chip provider
Rmt Vendor Data Remote code of the chip vendor
Table 2 Description on the fields of the display dsl status command
Field Description
Table 3 Description on the fields of the display dsl version interface atm command
Field Description
Dsl line Type Type of the user access line
ATM SAR Device Identifier of the SAR chip
ATM SAR Revision Revision identifier of the SAR chip
Chipset Vendor Identifier of the DSL chipset vendor
Firmware Rel-Rev Identifier and version of the firmware
DSP Version --
PCB Version --
CPLD Version Logic version
Driver Version Driver software version
Hardware Version --
ITU G991.2 ANNEX A, ITU
G991.2 ANNEX B
Standards and the annexes supported by the interface