Filter
Top Products
968 CHAPTER 72: BGP CONFIGURATION COMMANDS
display bgp routing-table
Syntax display bgp routing-table [ ip-address [{mask | mask-length } [ longer-prefixes ]]]
View Any view
Parameters ip-address: Destination IP address.
mask: Network mask, in dotted decimal notation.
mask-length: Mask length, in the range 0 to 32.
longer-prefixes: Matches the longest prefix.
Description Use the
display bgp routing-table command to display specified BGP routing
information in the BGP routing table.
Examples # Display BGP routing table information.
<Sysname> display bgp routing-table
Total Number of Routes: 1
BGP Local router ID is 10.10.10.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin:i-IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 40.40.40.0/24 20.20.20.1 0 200 300i
Peer optional capabilities Optional capabilities supported by the peer, including
BGP multiple extension and routing refresh.
Address family IPv4 Unicast Routes are advertised and received in the form of IPv4
unicast
Received Total numbers of received packets and updates
Sent Total numbers of sent packets and updates
Maximum allowed prefix number Maximum allowed prefix number
Threshold Threshold value
Minimum time between
advertisement runs
Minimum time between route advertisements
Optional capabilities Optional capabilities enabled by the peer
Peer Preferred Value Preferred value specified for the routes from the peer
Routing policy configured Local routing policy
Table 218 Description on the fields of the display bgp peer command
Field Description
Table 219 Description on the fields of the display bgp routing command
Field Description
Total Number of
Routes
Total Number of Routes