Filter
Top Products
2637
output-numbering-plan: Numbering plan for an output number involved in
number substitution. For the values, see Table 691.
Description Use the
rule command to configure a number substitution rule.
Use the undo rule command to remove a specified number substitution rule or
all number substitution rules.
By default, no number substitution rule is configured.
After you create a number substitution rule list successfully, you need to use this
command to configure specific number-substitute rules for it.
Related command: substitute (voice dial program view), number-substitute, first-rule, and
dot-match.
Example # Configure number substitution rules for number substitution rule list 1.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] number-substitute 1
# Configure number substitution rule 1 for number substitution rule list 1 as
follows:
■ Input number: 91
■ Output number: 1
[Sysname-voice-dial-substitute1] rule 1 ^91 1
isdn ISDN telephone numbering plan
national National numbering plan
private Private numbering plan
reserved Reserved numbering plan
telex Telex numbering plan
unknown Unknown numbering plan
Table 691 Output numbering plan
Numbering plan Description
data Data numbering plan
isdn ISDN telephone numbering plan
national National numbering plan
private Private numbering plan
reserved Reserved numbering plan
telex Telex numbering plan
unknown Unknown numbering plan
Table 690 Input numbering plan
Numbering plan Description