Filter
Top Products
1287
display ospfv3 next-hop
Syntax display ospfv3 [ process-id ] next-hop
View Any view
Parameters process-id: Specifies ID of an OSPFv3 process, ranging from 1 to 65535.
Description Use the
display ospfv3 next-hop command to display OSPFv3 next hop
information.
If no process is specified, next hop information of all OSPFv3 processes is
displayed.
Examples # Display OSPFv3 next hop information.
<Sysname> display ospfv3 next-hop
OSPFv3 Router with ID (2.2.2.2) (Process 1)
Neighbor-Id Next-Hop Interface RefCount
1.1.1.1 FE80::20F:E2FF:FE00:1 Eth1/0 1
display ospfv3 peer
Syntax display ospfv3 [ process-id ] [ area area-id ] peer [[interface-type interface-number ]
[ verbose ] | peer-router-id ]
View Any view
Parameters process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
area: Specifies to display neighbor information of the specified area.
area-id: The ID of an area, a decimal integer that is translated into IPv4 address
format by the system (in the range of 0 to 4294967295) or an IPv4 address.
interface-type interface-number: interface type and number.
verbose: Display detailed neighbor information.
peer-router-id: Router-ID of the specified neighbor.
Description Use the
display ospfv3 peer command to display OSPFv3 neighbor information.
Table 303 Description on the fields of the display ospfv3 next-hop command
Field Description
Neighbor-Id Neighboring router ID
Next-hop Next-hop address
Interface Outbound interface
RefCount Reference count